Contact
Series
5.2670

Wedge Clamps for Flat or Tapered Clamping Edge

electro-mechanical, max. operating force 240 kN
self-locking, with position monitoring
Wedge Clamps for Flat or Tapered Clamping Edge
Downloads
Catalogue sheet
Operating instructions
Available on demand.
Information Series
Description
Wedge clamps 5.2670

Description 

The clamping bolt of the wedge clamping elements is operated by a 24 VDC direct current drive via a snail transmission and a spindle stroke transmission.
The self-locking spindle lifting gear stops the actuator in case of power failure and maintains it safely in the reached position. During clamping, the clamping bolt is moved with low inclination onto the straight clamping edge. The clamping bolt is completely retracted in the guide housing in off-position.
The wedge clamp is equipped with an integrated position monitoring. In addition, fault messages can be output. The wedge clamping element is controlled via a control module equipped with different data interfaces.

Video
Products (55)
Loading…
clamping stroke [mm]
total stroke [mm]
type
wedge clamp, electromechanical (48)
type
position monitoring
with (48)
max clamping force [kN]
self-locking
yes (48)
bevel gear
cable exit
motor voltage [VDC]
24 (48)
permissible operating force [kN]
fixing screw
Item no. CAD datatypetypeposition monitoringmax clamping force [kN]
Item no.
CAD data
/
type
wedge clamp, electromechanical
type
for straight clamping edge
position monitoring
with
max clamping force [kN]
20
Properties
Item no.
CAD data
/
type
wedge clamp, electromechanical
type
for straight clamping edge
position monitoring
with
max clamping force [kN]
20
Properties
Item no.
CAD data
/
type
wedge clamp, electromechanical
type
for straight clamping edge
position monitoring
with
max clamping force [kN]
20
Properties
Item no.
CAD data
/
type
wedge clamp, electromechanical
type
for sloping clamping edge
position monitoring
with
max clamping force [kN]
12.5
Properties
Item no.
CAD data
/
type
wedge clamp, electromechanical
type
for sloping clamping edge
position monitoring
with
max clamping force [kN]
12.5
Properties
Item no.
CAD data
/
type
wedge clamp, electromechanical
type
for sloping clamping edge
position monitoring
with
max clamping force [kN]
12.5
Properties
Item no.
CAD data
/
type
wedge clamp, electromechanical
type
for sloping clamping edge
position monitoring
with
max clamping force [kN]
12.5
Properties
Item no.
CAD data
/
Item no.
CAD data
/
type
wedge clamp, electromechanical
type
for straight clamping edge
position monitoring
with
max clamping force [kN]
35
Properties
Item no.
CAD data
/
type
wedge clamp, electromechanical
type
for straight clamping edge
position monitoring
with
max clamping force [kN]
35
Properties
Loading…
Item no.
type
wedge clamp, electromechanical
type
for straight clamping edge
position monitoring
with
max clamping force [kN]
20
clamping stroke [mm]
16
total stroke [mm]
25
self-locking
yes
bevel gear
with
cable exit
at the bottom
motor voltage [VDC]
24
permissible operating force [kN]
90 (for screws 10.9)
fixing screw
M16
Item no.
type
wedge clamp, electromechanical
type
for straight clamping edge
position monitoring
with
max clamping force [kN]
20
clamping stroke [mm]
16
total stroke [mm]
25
self-locking
yes
bevel gear
with
cable exit
ccw
motor voltage [VDC]
24
permissible operating force [kN]
90 (for screws 10.9)
fixing screw
M16
Item no.
type
wedge clamp, electromechanical
type
for straight clamping edge
position monitoring
with
max clamping force [kN]
20
clamping stroke [mm]
16
total stroke [mm]
25
self-locking
yes
bevel gear
with
cable exit
at the top
motor voltage [VDC]
24
permissible operating force [kN]
90 (for screws 10.9)
fixing screw
M16
Item no.
type
wedge clamp, electromechanical
type
for sloping clamping edge
position monitoring
with
max clamping force [kN]
12.5
clamping stroke [mm]
18-22
total stroke [mm]
25
self-locking
yes
bevel gear
with
cable exit
cw
motor voltage [VDC]
24
permissible operating force [kN]
30 (for screws 8.8)
fixing screw
M16
Item no.
type
wedge clamp, electromechanical
type
for sloping clamping edge
position monitoring
with
max clamping force [kN]
12.5
clamping stroke [mm]
18-22
total stroke [mm]
25
self-locking
yes
bevel gear
with
cable exit
at the bottom
motor voltage [VDC]
24
permissible operating force [kN]
30 (for screws 8.8)
fixing screw
M16
Item no.
type
wedge clamp, electromechanical
type
for sloping clamping edge
position monitoring
with
max clamping force [kN]
12.5
clamping stroke [mm]
18-22
total stroke [mm]
25
self-locking
yes
bevel gear
with
cable exit
ccw
motor voltage [VDC]
24
permissible operating force [kN]
30 (for screws 8.8)
fixing screw
M16
Item no.
type
wedge clamp, electromechanical
type
for sloping clamping edge
position monitoring
with
max clamping force [kN]
12.5
clamping stroke [mm]
18-22
total stroke [mm]
25
self-locking
yes
bevel gear
with
cable exit
at the top
motor voltage [VDC]
24
permissible operating force [kN]
30 (for screws 8.8)
fixing screw
M16
Item no.
Item no.
type
wedge clamp, electromechanical
type
for straight clamping edge
position monitoring
with
max clamping force [kN]
35
clamping stroke [mm]
17
total stroke [mm]
25
self-locking
yes
bevel gear
without
cable exit
cw
motor voltage [VDC]
24
permissible operating force [kN]
160 (for screws 10.9)
fixing screw
M20
Item no.
type
wedge clamp, electromechanical
type
for straight clamping edge
position monitoring
with
max clamping force [kN]
35
clamping stroke [mm]
17
total stroke [mm]
25
self-locking
yes
bevel gear
without
cable exit
at the bottom
motor voltage [VDC]
24
permissible operating force [kN]
160 (for screws 10.9)
fixing screw
M20
Accessories (8)
Item no. CAD data Description
Item no.
CAD data
/
Description
Extension cable control cable and motor cable as a set both cables with plugs on both sides cable length: 5 m *as per catalogue sheet WZ 5.2670
Item no.
CAD data
/
Description
Extension cable control cable and motor cable as a set both cables with plugs on both sides cable length: 10 m *as per catalogue sheet WZ 5.2670
Item no.
CAD data
/
Description
Extension cable control cable and motor cable as a set both cables with plugs on both sides cable length: 15 m *as per catalogue sheet WZ 5.2670
Item no.
CAD data
/
Description
Extension cable control cable and motor cable as a set both cables with plugs on both sides cable length: 20 m *as per catalogue sheet WZ 5.2670
Item no.
CAD data
Description
Drill bushing DIN 179 A 12 x 12 mm *as per data sheet B1.738
Item no.
CAD data
Description
Drill bushing DIN 179 A 17 x 16 mm as per data sheet B1.738
Item no.
CAD data
Description
Drill bushing DIN 179 A 21 x 20 mm as per data sheet B1.738
Item no.
CAD data
Description
Drill bushing DIN 179 A 26 x 20 mm as per data sheet B1.738
Loading…
Application examples
Application example 1

Use of electromechanical wedge clamps:

1. Sliding tables

2. Injection moulding machines