Search
All results
Contact
+49 (0) 6405 - 890 Call now
info@roemheld.de Contact now
Series
B1.520

Block cylinders

for stroke end control
double acting, max. operating pressure 500 bar
Block cylinders
Downloads
Catalogue sheet
ENDEESFRITPL
Operating instructions
ENDEESFRIT
Information Series
Description
B 1.520 Block cylinders 

Double-acting block cylinders with stroke end control are particularly suitable for automated installations, time and cycle-dependent clamping and unclamping.

The stroke end control supplies the required information about the position of the piston. Control is made by pressure-proof sensors, which are fixed at the corresponding stroke end of the cylinder piston in the body.

stroke limitation by distance bushing
stroke limitation by distance bushing
Accessories (45)
Item no. CAD data Description
Item no.
3614002
CAD data
Description
Contact bolt M10 x 12 mm dome head as per data sheet G3.800
Item no.
3614003
CAD data
Description
Contact bolt M16 x 20 mm dome head as per data sheet G3.800
Item no.
3614015
CAD data
Description
Contact bolt M20 x 25 mm dome head as per data sheet G3.800
Item no.
3614016
CAD data
Description
Contact bolt M6 x 10 mm dome head as per data sheet G3.800
Item no.
3614017
CAD data
Description
Contact bolt M27 x 30 mm dome head as per data sheet G3.800
Item no.
3614018
CAD data
Description
Contact bolt M30 x 35 mm dome head as per data sheet G3.800
Item no.
3614019
CAD data
Description
Contact bolt M42 x 45 mm dome head as per data sheet G3.800
Item no.
3614020
CAD data
Description
Contact bolt M48 x 60 mm dome head as per data sheet G3.800
Item no.
3614021
CAD data
Description
Contact bolt M10 x 12 mm cone head as per data sheet G3.800
Item no.
3614022
CAD data
Description
Contact bolt M16 x 20 mm cone head as per data sheet G3.800
Error loading CAD data. Please check your internet connection and try again.
Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.