Block cylinders

double acting with extended piston rod for position monitoring
max. operating pressure 500 bar

Downloads

Catalogue sheet

EN DE ES FR IT

Operating instructions

EN DE ES FR IT

Information Series

Description

B 1.552 Block Cylinders double acting, with extended piston rod for position monitoring

Block cylinders with extended piston rods are used if one or several piston positions have to be controlled.

Especially if:

Standard inductive proximity switches should be used
The piston positions have to be adjusted on the spot
Control has to be effected at the cylinder bottom due to space restrictions

The piston is equipped with a rod of diameter 10 mm that protrudes at the cylinder bottom. At this rod the customer can fix a control cam that is used to operate any limit switch or sensor.
As an accessory a complete position monitoring system is available. This unit contains a control cam as well as two inductive proximitiy switches. The switches can be displaced in the housing. The housing will be screwed on at the cylinder bottom.

Accessories (52)

Number

Item no.	CAD data	Description
Item no. 3614072	CAD data	Description Swivel contact bolt M8 x 8 mm ball - flat face Ø 7.2 mm admissible load 10 kN as per data sheet G3.800
Item no. 3614073	CAD data	Description Swivel contact bolt M10 x 10 mm ball - flat face Ø 10.5 mm admissible load 25 kN as per data sheet G3.800
Item no. 3614074	CAD data	Description Swivel contact bolt M12 x 12 mm ball - flat face Ø 10.5 mm admissible load 25 kN as per data sheet G3.800
Item no. 3614075	CAD data	Description Swivel contact bolt M16 x 16 mm ball - flat face Ø 20 mm admissible load 90 kN as per data sheet G3.800
Item no. 3614091	CAD data	Description Contact bolt M12 x 12 mm with coupling pin max. 350 bar, as per data sheet G3.800
Item no. 3614118	CAD data	Description Swivel contact bolt M12 x 12 mm ball - serrated face Ø 10.5 mm admissible load 25 kN as per data sheet G3.800
Item no. 3614119	CAD data	Description Swivel contact bolt M16 x 16 mm ball - serrated face Ø 20 mm admissible load 90 kN as per data sheet G3.800
Item no. 3614131	CAD data	Description Swivel contact bolt M8 x 8 mm ball - serrated face Ø 7.2 mm admissible load 10 kN as per data sheet G3.800
Item no. 3614194	CAD data	Description Swivel contact bolt M10 x 10 mm ball - serrated face Ø 10.5 mm admissible load 25 kN as per data sheet G3.800
Item no. 3614228	CAD data	Description Swivel contact bolt M6 x 6 mm ball - flat face Ø 7.2 mm admissible load 10 kN as per data sheet G3.800