Swing Clamps with Overload Protection Device

Bottom flange and threaded body
single and double acting, max. operating pressure 500 bar

Downloads

Catalogue sheet

EN DE ES FR IT PL

Operating instructions

Information Series

Description

B 1.881 Swing Clamp with Overload Protection Device

Hydraulic swing clamps are used for clamping of workpieces, when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.

The hydraulic swing clamp is a pull-type cylinder where a part of the total stroke is used to swing the piston.

Swing direction
The units are available with clockwise and counterclockwise swing motion or without swing motion (0°).

Accessories (35)

Number

Item no.	CAD data	Description
Item no. 0354134	CAD data	Description Double clamping arm assembly, complete for 18X7-XXX with carrier, material: GGG-40 max. 500 bar, as per data sheet B1.880
Item no. 0354141	CAD data	Description Carrier, complete for 18X3-XXX with threaded bolt and spring clamping elements material: C 45 as per data sheet B1.880
Item no. 0354142	CAD data	Description Carrier, complete for 18X5-XXX with threaded bolt and spring clamping elements material: C 45 as per data sheet B1.880
Item no. 0354143	CAD data	Description Carrier, complete for 18X6-XXX with threaded bolt and spring clamping elements material: C 45 as per data sheet B1.880
Item no. 0354144	CAD data	Description Carrier, complete for 18X7-XXX with threaded bolt and spring clamping elements material: C 45 as per data sheet B1.880
Item no. 3000343	CAD data	Description O-ring 8 x 1.5 mm, NBR as per data sheet B1.5091
Item no. 3527014	CAD data	Description Nut M18 x 1.5 mm as per data sheet B1.880
Item no. 3527015	CAD data	Description Nut M28 x 1.5 mm as per data sheet B1.880
Item no. 3527016	CAD data	Description Nut M45 x 1.5 mm as per data sheet B1.880
Item no. 3527020	CAD data	Description Flanged nut M45 x 1.5 mm as per data sheet B1.881